Dogtra iQ Plus User Manual

Page 10

6. Checking the status using the
LED indicator

When the receiver/collar is on and ready to
RSHUDWHWKH/('ÀDVKHVHYHU\VHFRQGV
The LED will glow steadily on both
handheld transmitter and receiver/collar
while any buttons are pressed.

The LED color indicates battery life level.
Green = full charge, Amber = medium,
Red = needs charge

If you continue to operate the unit when
the LED is red (needs charge), it will shut
down.

6. Checking the status using the LED indicator

7. Charging the battery

1. Remove the rubber plug temporarily and

plug in the charger.

2. Plug the adapter’s power plug into a

standard AC wall outlet. The LED will
glow red.

3. When charging is finished the LED

will glow green. Unplug the adapter’s
power plug from the AC wall outlet and
disconnect the charger from the unit.

4. Place the rubber plug back in the battery

charging receptacle.

* The receiver/collar is still fully waterproof
even if the rubber plug is not closed,

but place the rubber plug in the battery
charging receptacle to make sure dirt
does not get inside.

7. Charging the battery