Dogtra 1200 Series - Manual (Page 7)

11
TRANSMITTER
Intensity Selection Dial
The intensity selection dial is located on the top of the
transmitter.
In the fully counter clockwise position-”zero” setting-
no electrical stimulation occurs even when the transmitter
button is pressed (a satety feature).
Moving the dial from the zero setting in a clockwise
manner, electrical stimulation will begin at a lower setting.
Continuing clockwise will increase the stimulation level in
a liner progression-no steps or increments up to the highest
level (100).
Conversely, moving the dial counter-clockwise, the
level reduces in a downward linear progression until at the
“zero” setting (fully counter-clockwise).
This feature allows for subtle adjustment of the level
(upward of downward) while the transmitter button is held
down continuously - providing e-linear training.
10
TRANSMITTER
Selection Switch on the Two-Dog
Models
The two-dog models have a toggle switch on
the face of the transmitter located above the
“Nick” button. The toggle switch allows for
selection of either collar.
Set the toggle switch on the orange position
to select the orange collar and the black position
to select the black collar.
Black
Orange
TWO-DOG MODELS
Collar
selection
switch