Operating instructions – Dogtra 1200 Series User Manual
Page 17
31
OPERATING
Intensity selection
To select the intensity level, start on the
“zero” setting. Gradually increase the level until
you get a response from the dog that would be
equivalent to a quick pull or “POP” with a leash.
Remember that you will need to adjust the
setting(upward or downward) as the dog’s
attitude changes, especially during times of
increased excitement or distraction.
30
OPERATING
Fitting the collar
The collar strap should be adjusted so that the
contact points are held firmly against the dog’s
skin. If the collar is too loose, it can cause
irritation from the contacts rubbing against the
skin.
If the dog has a heavy coat, move the receiver
up and down to work the contact points down
into the coat.
ATTENTION!
Avoid having the dog wear the collar with
the contact points in the same place for more
than two hours at a time. Leaving the points
on the same spot for extended periods of time
can cause skin irritation. If the dog is to wear
the e-collar for long periods, occasionally
reposition the collar so that the contact points
are moved to a different spot on the dog’s
neck.
OPERATING INSTRUCTIONS