Bercomac Subframe & Drive Mechanism for JOHN DEERE Series X300 - Manual (Page 17)

15
ASSEMBLY
Attach the Utility Blade (item 1) to the subframe (item
2) as shown.
Make sure the Utility Blade is pushed in until locked
into place by the springs (item 3).
To use the utility blade with the mower deck installed
on the tractor, adjust the height of mower deck wheels
to the highest position
Insert the handgrip (item 5) on the handle (item 1).
Insert the handle (item 1) through the handle support
(item 2) as shown.
Install the handle on the control rod (item 3) as shown
and secure with a 2.5 mm hair pin (item 4).
ADJUST THE LIFT SYSTEM:
Use the adjustable link to obtain the desired lift height
(maximum 4")
NOTE: The adjustment gauge (on the tractor) for the
height of the mower deck must be in the lowest
position (position 1). See tractor owner’s manual for
more information.
VERIFY TIRE PRESSURE:
Check and adjust tractor tire pressure as follows:
Front tires: 13-14 psi
Back tires: 9-10 psi
Tire pressure must be even on both sides of the
tractor.
Install utility blade
STEP 7:
UTILITY BLADE INSTALLATION:
Refer to blade owner’s manual, parts breakdown
Install handle
WARNING
FOR YOUR SECURITY:
Read the Utility Blade owner's manual for safety
precautions and rules.
Follow the assembly and operation instructions.