BMW 2007 bmw 328i - Manual (Page 284)

21-watt bulb, PY21W
1. In the wheel house, loosen the two brackets
and remove the cover.
2. If necessary, pull the inside trim of the wheel
house slightly inward. Turn the bulb holder
counterclockwise and remove.
3. Press the bulb gently into the socket, turn
counterclockwise and remove.
4. Install the new bulb and bulb holder in re‐
verse order of removal.
5. Attach the cover to the wheel house.
Front fog lamps
Follow the General instructions on lamps and
bulbs, refer to page
279 .
35-watt bulb, H8
1. Use the back side of the screwdriver from
the onboard vehicle tool kit to remove the
three wheel house panel screws, arrow 1.
Carefully raise the wheel house panel, ar‐
row 2.
2. Pull off the bulb connector, arrow 1.
Turn the bulb, arrow 2.
Left side of vehicle: turn clockwise.
Right side of vehicle: turn counterclockwise.
Remove the bulb.
3. Insert the new bulb, connect the connector
and screw on the wheel house panel.
Turn signal in exterior mirror
Follow the General instructions on lamps and
bulbs, refer to page
279 .
The turn signals feature LED technology. Con‐
tact your service center in the event of a mal‐
function.
Seite 284
Mobility Replacing components
284
Online Edition for Part no. 01 40 2 608 633 - 11 09 490