beautypg.com

Digital compass – BMW 2007 bmw 328i User Manual

Page 143

background image

ror has been programmed. The system can
then be controlled by the button on the in‐
terior rearview mirror.
If the LED does not flash faster after at least
60 seconds, change the distance and repeat
the step. Several more attempts at different
distances may be necessary. Wait at least
15 seconds between attempts.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the
interior rearview mirror button and repeat‐
edly press and release the hand-held trans‐
mitter button for 2 seconds.

Controls

Before operation
Before operating a system using the

integrated universal remote control, ensure that
there are no people, animals, or objects within
the range of movement of the remote-controlled
system; otherwise, there is a risk of injury or
damage.
Also follow the safety instructions of the hand-
held transmitter.◀

The system, such as the garage door, can be
operated using the button on the interior rear‐
view mirror while the engine is running or when
the ignition is started. To do this, hold down the
button within receiving range of the system until
the function is activated. The interior rearview
mirror LED stays lit while the wireless signal is
being transmitted.

Deleting stored functions

Press and hold the left and right button on the
interior rearview mirror simultaneously for ap‐
proximately 20 seconds until the LED flashes
rapidly. All stored functions are deleted. The
functions cannot be deleted individually.

Digital compass

At a glance

1 Control button
2 Mirror display

Mirror display

The point of the compass is displayed in the
mirror when driving straight.

Operating concept

Various functions can be called up by pressing
the control button with a pointed object, such as
the tip of a ballpoint pen or similar object. The
following setting options are displayed in suc‐
cession, depending on how long the control but‐
ton is pressed:

Pressed briefly: turns display on/off.

3 to 6 seconds: compass zone setting.

6 to 9 seconds: compass calibration.

9 to 12 seconds: left/right-hand steering
setting.

12 to 15 seconds: language setting.

Setting the compass zones

Sets the particular compass zones on the vehi‐
cle so that the compass operates correctly; refer
to World map with compass zones.

Seite 143

Interior equipment

Controls

143

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

This manual is related to the following products: