Replacing components, Vehicle equipment, Onboard vehicle tool kit – BMW 2007 bmw 328i User Manual
Page 279: Wiper blade replacement, Lamp and bulb replacement
Replacing components
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equip‐
ment or country variant. This also applies for
safety-related functions and systems.
Onboard vehicle tool kit
The onboard vehicle tool kit is located on the
right side in the cargo area in a storage com‐
partment. Open the cover.
Wiper blade replacement
General information
Do not fold down the wipers without wiper
blades
Do not fold down the wipers if wiper blades have
not been installed; this may damage the wind‐
shield.◀
Replacing the wiper blades
1.
To change the wiper blades, fold up, refer to
page
, the wiper arms.
2.
Fold up and hold the wiper arm firmly.
3.
Squeeze the retainer spring, arrow 1, and
fold up the wiper blade, arrow 2.
4.
Remove the wiper blade forward from the
catch.
5.
Insert the new wiper blade in reverse order
of removal until it locks in place.
Risk of damage
Before opening the hood, ensure that the
wiper arms with the wiper blades are against the
windshield to prevent damage.◀
Lamp and bulb replacement
General information
Lamps and bulbs make an essential contribution
to vehicle safety.
The manufacturer of the vehicle recommends
that you entrust corresponding procedures to
the service center if you are unfamiliar with them
or they are not described here.
You can obtain a selection of replacement bulbs
at the service center.
Danger of burns
Only change bulbs when they are cool;
otherwise, there is the danger of getting
burned.◀
Seite 279
Replacing components
Mobility
279
Online Edition for Part no. 01 40 2 608 633 - 11 09 490