Culligan Iron-Cleer - Manual (Page 11)

7
Pressing the “Status” key will save the setting and move to the next programming step.
Settline Time
This setting is used to set the time in minutes for cycle 2.
This cycle is usually brine draw / slow rinse for softeners
and a settling time for filters. The display will show “br”
in the left most digits and the cycle time in the right most
digits. Adjust the value with the “+” or “-” keys.
Pressing the “Status” key will save the setting and move to
the next programming step.
Fast Rinse Time
This setting is used to set the time in minutes for cycle 3.
The display will show “Fr” in the left most digits and then
the cycle time in the right most digits. Adjust the value with
the “+” or “-” keys. Pressing the “Status” key will save the
setting and move to the next programming step.
Regeneration Interval
This setting is used to set the days between regeneration
in time clock mode. The display will show “REG” icon and
“dAY” for two seconds and then display the numbers to
change. Adjust the value with the “+” or “-” keys.
Pressing the “Status” key will save the setting and move
to the next programming step.
Troubleshooting
The Culligan Medallist Series Filter is equipped with an
advanced error detection system. During all operating
modes the filter’s electronics are performing self-diagnostics
to ensure that the unit is operating correctly. There may be times, however, when something may occur
that could cause the unit to improperly operate. In those instances the microprocessor will identify the
exact problem and alert the user with a telephone handset symbol in the upper left corner of the display
and the error code will be shown. Shown below is codes that would appear if an error is detected.
Display Error Description Response
E1 Motor will not stop turning Call Culligan service technician
E2 Motor stuck Call Culligan service technician
E3 Wrong position Call Culligan service technician
If an error code appears that requires an authorized service technician please contact your local
Culligan Dealer.
For any additional troubleshooting or service needs please contact your local Culligan Dealer.