Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 39)

Getting Started Guide | 37
A License Activation
To have access to all of the features of Bio-Plex Manager™ MP software, you must
activate the product with a valid product license. You will need a separate license
for each computer on which you install Bio-Plex Manager MP.
Note: If you purchased a new MAGPIX instrument, the computer included with
the instrument comes with the software already activated. Therefore, you can
skip this step.
Activating the Bio-Plex Manager MP License
You can activate the product either online (if you have access to the Internet) or
through Technical Support (if you do not have Internet access).
Note: To activate your license, you will need the product activation code,
which can be found in the Bio-Plex Manager MP CD folder.
Activating the License Online
Follow the procedure below if the computer on which Bio-Plex Manager MP is
installed has an Internet connection. With this method, the software uses your
activation code to automatically activate your software.
To activate Bio-Plex Manager MP online
1. Start the Bio-Plex Manager MP software.