Bio-Rad Experion™ Vortex Station II - Manual (Page 9)

9 122008
Power
2 Switch on LED lights up.
the device
Using the device
3 Start After pressing the “Mix” button, the unit will
shaking operation vortex the microfluidic chip for a preset time
of 60 sec. The unit will stop vortexing auto-
matically providing an audible signal once
mixing is complete.
Setting Action
The unit is ready for service when the
power plug has been plugged in.
1 Attach Ensure that the microfluidic chip is inserted
microfluidic chip properly.
Mix
4 Remove Press the release arm.
microfluidic chip Then the microfluidic chip is sliding out.