beautypg.com

Contents safety instructions – Bio-Rad Experion™ Vortex Station II User Manual

Page 7

background image

7

122008

Page

CE-Declaration of conformity

2

Safety instructions

7

Scope of supply

8

Correct use

8

Using the device

9

Maintenance/ In case of repair

10

Technical data

10

For your protection

• Read the operating instructions in full before starting up and

follow the safety instructions.

Keep the operating instructions in a place where they can be

accessed by everyone.

Ensure that only trained staff work with the appliance.
Follow the safety instructions, guidelines, occupational health

and safety and accident prevention regulations.

The device must only be operated with the original plug-in power

supply unit.

The power supply unit must be operated with the appropriate

country adapter.

Wear your personal protective equipment in accordance with the

hazard category of the medium to be processed. Otherwise
there is a risk of:

- splashing liquids,
- projectile parts,
- body parts, hair, clothing and jewellery getting caught.

Set up the appliance in a spacious area on an even, stable, clean,

non-slip, dry and fireproof surface.

The feet of the appliance must be clean and undamaged.

Firmly secure the Vortex adapter and the microfluidic chip in

place, otherwise the microfluidic chip could be damaged or pro-
jected out.

Check the appliance and accessories beforehand for damage

each time you use them. Do not use damaged components.

Beware of the risk of

- flammable materials,
- glass breakage as a result of mechanical shaking power.

Only process media that will not react dangerously to the extra

energy produced through processing. This also applies to any
extra energy produced in other ways, e.g. through light irradiation.

• Do not operate the appliance in explosive atmospheres, with

hazardous substances or under water.

The appliance does not start up again automatically following a

cut in the power supply.

The appliance may heat up when in use.

For the protection of the equipment

The voltage stated on the nameplate must correspond to the

mains voltage.

Protect the appliance and accessories from bumps and impacts.
The appliance may only be opened by experts.

Contents

Safety instructions

EN