Bio-Rad Model 225 Tube Gel Casting Stand - Manual (Page 3)

Note
To insure best performance from the Mini-PROTEAN 2-D electrophoresis cell, become
fully acquainted with these operating instructions before using the cell to separate samples.
Bio-Rad recommends that you first read these instructions carefully. Then assemble and
disassemble the cell completely without casting a gel. After these preliminary steps, you
should be ready to cast and run a gel.
Bio-Rad also recommends that all Mini-PROTEAN 2-D cell components and accessories
be cleaned with a suitable laboratory cleaner (such as Bio-Rad Cleaning Concentrate,
catalog number 161-0722) and rinsed thoroughly with distilled water, before use.
Warranty
Bio-Rad Laboratories warrants the Mini-PROTEAN 2-D cell against defects in materials
and workmanship for 1 year. If any defects occur in the instrument during this warranty
period, Bio-Rad Laboratories will repair or replace the defective parts free. The following
defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an
authorized agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad
Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
This warranty does not apply to parts listed below:
1. Platinum wire, glass plates.
For any inquiry or request for repair service, contact Bio-Rad Laboratories after confirming
the model and serial number of your instrument.
Model
Catalog No.
Date of Delivery
Serial No.
Invoice No.
Purchase Order No.