B&G H50 Wireless VHF Handset - Manual (Page 67)

HAILER
PA
►FOG HORN
INTERCOM
FOG HORN
►HORN
UNDERWAY
STOP
SAIL
▼
FOG HORN
UNDERWAY
▲
STOP
►SAIL
ANCHOR
▼
SAIL
OUTPUT
VOL
LO HI
Note: you cannot change the volume of the HORN or SIREN.
11-2 Using the PA (Public Address) Hailer
An appropriate Hailer speaker must be connected to the Hailer wiring before the PA function
can be used. The PA allows you to make an announcement at high volume to people or
vessels using the V50 hand mic. The PA function also features a listen-back mode - this mode
uses the Hailer speaker as a microphone to listen for a response.
1. Press and hold the AIS/IC button for about 1 second to enter HAILER mode. Select PA
and press ENT.
2. Press PTT to talk through the hailer. Turn the Channel Select knob, or press + or – to
change the volume. Volume can only be changed while the PTT is pressed.
3. Release PTT to LISTEN for a response.
HAILER
►PA
FOG HORN
INTERCOM
PA
OUTPUT
VOL
LO HI
PA
LISTEN
4. Press EXIT to return to operational mode.
B&G - V50 & H50 Operation Instructions 67