B&G H50 Wireless VHF Handset - Manual (Page 37)

USER MMSI
876543210
►STORE
CANCEL
DSC SETUP
►USER MMSI
GROUP SETUP
ATIS MMSI
ATIS SELEC ▼
VIEW MMSI
876543210
1. Select DSC SETUP, then USER MMSI.
If you have already entered your MMSI, it is shown on the LCD.
2. If this is the first time that you are entering your MMSI, a dashed line appears.
Enter your MMSI along the dashed line, one number at a time. Press ENT to confirm
each correct entry and to move to the next digit.
If you make an error, press – until < appears, then press ENT to backup and correct the
entry.
3. Press ENT to store your user MMSI.
4. Enter your user MMSI again as a password check, then press ENT to permanently store
the user MMSI and return to the menu.
5. You can view your stored user MMSI at anytime by selecting USER MMSI in the main
menu.
5-2 Maintain your groups
Use GROUP SETUP to create, edit, or delete 1, 2, or up to 20 groups of frequently called
people stored in alphanumeric order. A group MMSI always starts with 0.
5-2-1 Create a group (GROUP SETUP)
DSC SETUP
USER MMSI
►GROUP SETUP
ATIS MMSI
ATIS SELEC ▼
GROUP SETUP
MANUAL NEW
GROUP NAME
GROUP MMSI
0
FISHING 1
012345678
►STORE
CANCEL
1. Select DSC SETUP then GROUP SETUP.
2. Select MANUAL NEW.
3. If this is the first time that you are entering a group name, a dashed line appears
4. Enter the group name along the dashed line. It can be a maximum of 12 alphanumeric
characters. Press ENT to confirm each correct entry and to move to the next position.
If you make an error, press – until < appears, then press ENT to backup and correct the
entry.
5. Enter the group MMSI. (Note that the first number is always a 0.) Press ENT.
6. The group name and group MMSI are shown in a confirmation screen. Press ENT to
store the details and return to the GROUP SETUP screen.
B&G - V50 & H50 Operation Instructions 37