B&G H50 Wireless VHF Handset - Manual (Page 36)

Section 5 - DSC setup menu (DSC SETUP)
WARNING
A valid USER MMSI must be entered into the radio before these DSC functions can be
used. See Section 5-1 for instructions on entering your USER MMSI.
Hold down CALL/MENU key for about 1 second to access the following DSC SETUP options.
The following menu options are explained in this section.
DSC SETUP USER MMSI Section 5-1
GROUP SETUP Section 5-2
ATIS MMSI (EU only) Section 5-3
ATIS SELECT (EU only) Section 5-4
INDIV REPLY Section 5-5
DSC FUNC Section 5-6
LL REPLY Section 5-7
AUTO SWITC Section 5-8
TEST REPLY Section 5-9
TIMEOUT Section 5-10
See sections 1-3 and 1-4 if you want to know how to move around the menu and enter, save
and change data.
5-1 Enter or view your USER MMSI (USER MMSI)
This is a once-only operation. You must enter your user MMSI before you can access the DSC
functions.
You can display and read your user MMSI at any time, but you get only one opportunity to
enter your user MMSI.
The user MMSI (Marine Mobile Service Identity) is a unique 9 digit number, similar to a
personal telephone number. It is used on marine transceivers that are capable of using DSC
(Digital Select Calling).
Contact the appropriate authorities in your country to obtain your user MMSI. If you are
unsure who to contact, consult your B&G dealer.
DSC SETUP
►USER MMSI
GROUP SETUP
ATIS MMSI
ATIS SELEC ▼
INPUT USER
MMSI
USER MMSI
876543210
►STORE
CANCEL
USER MMSI
INPUT AGAIN
B&G - V50 & H50 Operation Instructions 36