B&G Zeus2 12 - Manual (Page 99)

Acknowledging a message
The following options are available in the alarm dialog for acknowledging a message:
Option Result
Close Sets the alarm state to acknowledged, meaning that you are aware of the alarm
condition. The siren / buzzer will stop and the alarm dialog will be removed.
The alarm will, however, remain active in the alarm listing until the reason for
the alarm has been removed.
Disable Disables the current alarm setting. The alarm will not show again unless you
turn it back on in the Alarms dialog.
There is no time-out on the alarm message or siren. They remain until you acknowledge the
alarm or until the reason for the alarm is removed.
Alarms dialog
All alarms are setup in the Alarms Settings dialog.
The alarm dialogs can also be activated from the Tools panel. The alarm dialogs includes
information about active alarms and alarm history.
Alarms | Zeus2 Operator Manual 99