Apricorn Velocity Solo - SSD Upgrade Kit for Desktop PCs - Manual (Page 6)

10 11 www.apricorn.com www.apricorn.com
Make sure your Velocity Solo is installed
before using EZ Gig
Before starting the EZ Gig software, please ensure that your new solid
state drive is connected installed with your Velocity Solo card. EZ Gig
automatically verifies which Apricorn upgrade product is being used. If
used without one of Apricorn’s upgrade products, EZ Gig will not work.
EZ Gig Start Up Options
After downloading EZ Gig from Apricorn’s site, open the EZ Gig program or
double click on the EZ Gig icon to get started. From here you can either:
1. Choose the Start option (go to page 13) OR
2. Create a bootable EZ Gig CD to use in the future (go to page 12 for
instructions).
Creating a Bootable EZ Gig CD
If you downloaded EZ Gig from Apricorn’s website, you have the option
of creating a bootable EZ Gig CD or thumb drive to use in the future.
To create a bootable media disk follow the appropriate directions below:
• To create a bootable CD/DVD, choose the desired drive at ‘CD/
DVD writer’ and click “Create CD/DVD”.
• To create a bootable USB key, choose the desired drive at ‘USB
medium’ and click “Make bootable”.
Follow the instructions and wait until the installation program reports
successful creation of the bootable medium.
Once you have created you bootable media device, click “Exit” and then
choose “Start EZ Gig”.