Apricorn Aegis Padlock USB 3.0 - Solid State Drive User Manual
Aegis padlock 3.0, Quick start guide
Quick Start Guide
0
cancel
2
abc
5
jkl
6
mno
9
wxyz
8
tuv
7
pqrs
4
ghi
3
def
1
1
2
3
3
1
2
Cancel button
button
LED Indicator light
Remember to save your password in a safe place. If
lost or forgotten, there is no way to access the drive.
If you are having difficulty please refer to the
complete user’s manual which is loaded on your
Aegis Padlock drive and is also available at
Apricorn’s website at:
www.apricorn.com/support
Your Aegis Padlock is preformatted in NTFS for Windows
®
and is ready for use. For the Mac
OS please refer to the directions on the reverse to reformat your drive to a compatible format.
To access the Aegis Padlock plug your drive into a powered USB port (for the fastest data
transfer speeds use a USB 3.0 port - the Aegis Padlock is also backwards compatible with
USB 2.0), enter the default PIN number of
123456 and press .
The indicator light will change from RED to GREEN indicating the drive is unlocked and can be
accessed.
Changing the ADMIN PIN number to your own unique PIN number
You are the “administrator” of this drive. The first thing you will want to do is change the
Administrator PIN number from the default 123456 to a unique, secure PIN number that you
will remember.
To change the Admin PIN number follow the instructions below:
To enter Admin Mode, first plug the drive into the USB port and wait until the LED light
1.
turns RED.
Next, press and hold 0 + for 5 seconds until the LED light flashes RED.
2.
Enter the Admin PIN number (default is 123456) and press . The LED light will turn
3.
BLUE indicating you are in Admin Mode.
While in Admin Mode, press and hold 9 + until the LED light flashes BLUE.
4.
Enter the new PIN number (minimum 6 digits) and press . The LED light will flash
5.
GREEN 3 times if successful.
Re-enter the new PIN number and press . The LED light will stay solid GREEN for
6.
2 seconds then solid BLUE indicating you have successfully changed the Admin PIN.
To exit Admin Mode and begin using your Aegis Padlock drive, press the CANCEL
7.
button until the LED turns RED. Now enter your new PIN number and press .
Aegis
Padlock
3.0