Aphex Project 500 - Manual (Page 11)

Page 11
6.2 SERVICE INFORMATION
If it becomes necessary to return this unit for repair, you must first contact
Aphex for a Return Authorization (RMA number), which will need to be
included with your shipment for proper identification. If available, repack
this unit in its original carton and packing material. Otherwise, pack the
equipment in a strong carton containing at least 2 inches of padding on
all sides. Be sure the unit cannot shift around inside the carton. Include a
letter explaining the symptoms and/or defect(s). Be sure to reference the
RMA number in your letter and mark the RMA number on the outside of the
carton. If you believe the problem should be covered under the terms of the
warranty, you must also include proof of purchase. Insure your shipment and
send it to APHEX at the address provided with the RMA.
INPUT
Type:
Impedance:
Unbalanced:
Nominal Level: Maximum
Level:
CMRR:
OUTPUT
Impedance:
Nominal Level:
Maximum Level:
AUDIO
Frequency Response:
Dynamic Range:
THD:
IMD:
OPERATING LEVEL
Switch Setting: +4dBu
Transformerless, active balanced
40KΩ
20KΩ
+4dBu
+24dBu
>40dB
110Ω
+4dBu
+24dBu Unloaded
+0.5dB 10Hz-38KHz
120dB
10Hz - 22kHz @ max output
.0003%
10Hz - 22kHz 0 max output,
.0007%
7.0 SPECIFICATIONS
CONNECTOR PINOUT
1 CHASSIS GROUND
2 OUTPUT + (+4 LEVEL)
3 (unused)
4 OUTPUT - (+4 LEVEL)
5 COMMON
6 LINK
7 (unused)
8 INPUT- (+4 LEVEL)
9 (unused)
10 INPUT+ (+4 LEVEL)
11 (unused)
12 +16VDC
13 POWER SUPPLY COMMON
14 -16VDC
15 (unused)