Edetail e scale 1 : 3, Gf detail f scale 1 : 5, Detail g scale 2 : 5 – Amico Light-Duty Monitor Arm User Manual
Page 7: Pdetail p scale 2 : 5, Ndetail n scale 2 : 5, Odetail o scale 2 : 5, Mounting to vrs (vertical rail system), Figure 3, Figure 2
www.amico.com
7
Mounting to VRS (Vertical Rail System):
1. Assemble LMA to X-LMA-(VRS/VRS-B)-ADA by placing LMA onto X-LMA-(VRS/VRS-B)-ADA and securing with the
screw through washer, X-LMA-(VRS/VRS-B)-ADA, LMA, and into cap, using #3 Philips head screwdriver (as shown
in Figure 2 below).
2. Turn two X-GTA-KNOB-X-GTA-KNOB-B to loosen two HR-CONV-PIN. Tilt and guide the two HR-CONV-PIN into the
opening of the VRS rail (Figure 3).
3. Ensure the flange on the X-SSM-VERT-ADA is properly aligned with the rail. Position to desired height before
tightening two X-GTA-KNOB/X-GTA-KNOB-B (Figure 3).
4. Lock the two X-GTA-KNOB/X-GTA-KNOB-B with two H-1420-LNUT-NYL using a 1/2" (12.7 mm) socket wrench and
cover with two H-CAP-14-B (Figure 3).
SECTION 3: Installation on Mounting Platform
E
DETAIL E
SCALE 1 : 3
X-LMA-MON-ADA/
X-LMA-MON-B-ADA
MRS RAIL
2 X H-SSCP-1420-05
G
F
DETAIL F
SCALE 1 : 5
Figure 3
2 X H-CAP-14-B
2 X H-1420-LNUT-NYL
X-GTA-KNOB/
X-GTA-KNOB-B
DETAIL G
SCALE 2 : 5
Figure 1
HR-CONV-PIN
X-SSM-VERT-ADA
P
DETAIL P
SCALE 2 : 5
Figure 2
2 X HR-CONV-PIN
X-GTA-KNOB/
X-GTA-KNOB-B
2 X H-CAP-14-B
CUSTOMER
FOR USE WITH: LMA-__-(MON/MON-B)-__, LMA-__-(VRS/VRS-B)-__
PROJECT 394
X-LMA-(VRS-/VRS-B)-ADA
X-LMA-(MON/MON-B)-ADA
Slide X-LMA-(MON/MON-B)-ADA into the
1.
MRS rail.
Once the arm is positioned at the desired
2.
height, tighten 2 x H-SSCP-1420-05.
Turn 2 x X-GTA-KNOB/X-GTA-KNOB-B to loosen 2 x HR-
1.
CONV-PIN. Tilt and guide the 2X HR-CONV-PIN into the
opening of the VRS rail (Figure 1).
Ensure the flange on the X-SSM-VERT-ADA is properly
2.
aligned with the rail. Position to desired height before
tightening 2 x X-GTA-KNOB/X-GTA-KNOB-B. (Figure 2)
Lock the 2 x X-GTA-KNOB/X-GTA-KNOB-B with 2 x H-1420-
3.
LNUT-NYL and 2 x H-CAP-14-B. (Figure 3)
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
6
10
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
LMA ASSEMBLY
JT
2014-05-26
EC
2014-06-10
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
LMA ASSEMBLY
LMA-__-(_____)-__
20140526-E2900
PROJECTION
www.amico.com
E
DETAIL E
SCALE 1 : 3
X-LMA-MON-ADA/
X-LMA-MON-B-ADA
MRS RAIL
2 X H-SSCP-1420-05
G
F
DETAIL F
SCALE 1 : 5
Figure 3
2 X H-CAP-14-B
2 X H-1420-LNUT-NYL
X-GTA-KNOB/
X-GTA-KNOB-B
DETAIL G
SCALE 2 : 5
Figure 1
HR-CONV-PIN
X-SSM-VERT-ADA
P
DETAIL P
SCALE 2 : 5
Figure 2
2 X HR-CONV-PIN
X-GTA-KNOB/
X-GTA-KNOB-B
2 X H-CAP-14-B
CUSTOMER
FOR USE WITH: LMA-__-(MON/MON-B)-__, LMA-__-(VRS/VRS-B)-__
PROJECT 394
X-LMA-(VRS-/VRS-B)-ADA
X-LMA-(MON/MON-B)-ADA
Slide X-LMA-(MON/MON-B)-ADA into the
1.
MRS rail.
Once the arm is positioned at the desired
2.
height, tighten 2 x H-SSCP-1420-05.
Turn 2 x X-GTA-KNOB/X-GTA-KNOB-B to loosen 2 x HR-
1.
CONV-PIN. Tilt and guide the 2X HR-CONV-PIN into the
opening of the VRS rail (Figure 1).
Ensure the flange on the X-SSM-VERT-ADA is properly
2.
aligned with the rail. Position to desired height before
tightening 2 x X-GTA-KNOB/X-GTA-KNOB-B. (Figure 2)
Lock the 2 x X-GTA-KNOB/X-GTA-KNOB-B with 2 x H-1420-
3.
LNUT-NYL and 2 x H-CAP-14-B. (Figure 3)
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
6
10
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
LMA ASSEMBLY
JT
2014-05-26
EC
2014-06-10
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
LMA ASSEMBLY
LMA-__-(_____)-__
20140526-E2900
PROJECTION
www.amico.com
E
DETAIL E
SCALE 1 : 3
X-LMA-MON-ADA/
X-LMA-MON-B-ADA
MRS RAIL
2 X H-SSCP-1420-05
G
F
DETAIL F
SCALE 1 : 5
Figure 3
2 X H-CAP-14-B
2 X H-1420-LNUT-NYL
X-GTA-KNOB/
X-GTA-KNOB-B
DETAIL G
SCALE 2 : 5
Figure 1
HR-CONV-PIN
X-SSM-VERT-ADA
P
DETAIL P
SCALE 2 : 5
Figure 2
2 X HR-CONV-PIN
X-GTA-KNOB/
X-GTA-KNOB-B
2 X H-CAP-14-B
CUSTOMER
FOR USE WITH: LMA-__-(MON/MON-B)-__, LMA-__-(VRS/VRS-B)-__
PROJECT 394
X-LMA-(VRS-/VRS-B)-ADA
X-LMA-(MON/MON-B)-ADA
Slide X-LMA-(MON/MON-B)-ADA into the
1.
MRS rail.
Once the arm is positioned at the desired
2.
height, tighten 2 x H-SSCP-1420-05.
Turn 2 x X-GTA-KNOB/X-GTA-KNOB-B to loosen 2 x HR-
1.
CONV-PIN. Tilt and guide the 2X HR-CONV-PIN into the
opening of the VRS rail (Figure 1).
Ensure the flange on the X-SSM-VERT-ADA is properly
2.
aligned with the rail. Position to desired height before
tightening 2 x X-GTA-KNOB/X-GTA-KNOB-B. (Figure 2)
Lock the 2 x X-GTA-KNOB/X-GTA-KNOB-B with 2 x H-1420-
3.
LNUT-NYL and 2 x H-CAP-14-B. (Figure 3)
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
6
10
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
LMA ASSEMBLY
JT
2014-05-26
EC
2014-06-10
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
LMA ASSEMBLY
LMA-__-(_____)-__
20140526-E2900
PROJECTION
www.amico.com
Figure 3
N
DETAIL N
SCALE 2 : 5
X-LMA-(MON/MON-B)-ADA
X-LMA-(VRS-/VRS-B)-ADA
SCREW
(PART OF X-LMA-01-01)
WASHER
(PART OF X-LMA-01-01)
CAP
(PART OF X-LMA-01-01)
X-LMA-VRS-ADA/
X-LMA-VRS-B-ADA
O
DETAIL O
SCALE 2 : 5
SCREW
(PART OF X-LMA-01-01)
LMA-__-(_____)-__
WASHER
(PART OF X-LMA-01-01)
CAP
(PART OF X-LMA-01-01)
X-LMA-MON-ADA/
X-LMA-MON-B-ADA
CUSTOMER
FOR USE WITH: LMA-__-(MON/MON-B)-__, LMA-__-(VRS/VRS-B)-__
PROJECT 394
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
5
11
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
LMA ASSEMBLY
JT
2014-05-26
EC
2014-06-10
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
LMA ASSEMBLY
LMA-__-(_____)-__
20140526-E2900
PROJECTION
www.amico.com
Figure 2