ADS Environmental Services PrimeProbe2 QR 775016 A0 - Manual (Page 33)

PrimeProbe2 User Manual
29
down any key on the keypad for more than 1 second. After
releasing the key, characters will appear on the display.
Note: When the display is on, energy save mode goes off,
reducing battery life significantly.
Please keep in mind that even though the display may be OFF, the
PrimeProbe is still in operation and measuring flow. If the PrimeProbe2
will not be used for an extended period of time, place the instrument in
standby mode (described in Stand-by under Diagnostics).
 Quick Start = Allows the user to toggle On or Off the Quick
Start Menu.
 Net Total = Allows the user to turn On or Off the display of Net
Totals.
 Currency = Activates the currency functions. When activated, a
currency value appears on the display in place of the totalizers (i.e.,
a monetary value appears that is equivalent to the totals). This
corresponds to the Partial Totalizers. When the partial totalizers
are reset, the currency totalizers are also reset.
 Curr. Decim. = Allows the user to select the number of decimal
places in the Currency display. Choose from 0 to 3.
Data Logger
PrimeProbe2 does not have an internal data logger. Program the external
data logger separately from the PrimeProbe2 using PrimeWorks software.
This menu exists for possible future functionality.
Diagnostics
 Calibration Allows the user to calibrate the sensor. Press the
Enter key with the cursor on Calibration. Execute? will appear
on the display. Press Enter to confirm, or any other key to cancel
the operation.
 Self Test Allows the user to test all the functions of the
PrimeProbe2, including all the input circuits and the excitation
generator. Initiate the test by pressing the Enter key. When
Execute? appears on the display, press Enter to confirm.
After completion, the results from the test will appear on the
display. This test occurs every time the user turns on (powers up)
the unit.
 Simulation Facilitates flow rate simulation. This function is
useful when testing external units connected to the PrimeProbe2.
Toggle On/Off to start/stop this feature.
 Stand-by Allows the user to place the PrimeProbe2 in standby
mode when it will not be used for an extended period of time. To
activate this function, press the Enter key. When the Execute?