Great Plains 3000TM Predelivery Manual - Manual (Page 24)

20 1800-3000TM Great Plains Manufacturing, Inc.
586-536Q 03/19/2014
Install Decals
Refer to Figure 22
Note: The center brace bar decals will need installed in loca-
tions shown. Clean the area on which the decal is to be
placed. Peel backing from decal. Press firmly on sur-
face, being careful not to cause air bubbles under decal.
75. Install two, 838-615C amber decals (one each side).
76. Install one 838-611C hand crushing decal on front of
brace bar (right side).
Refer to Figure 23
77. Install one, 848-972C bypass valve operating instruction
decal on front of truss (left side).
78. Install one, 848-844C fold valve decal on front tube of
center brace bar (left side) with arrow pointing towards
two way fold valve
.
Figure 22
Decals
42421
2
1
1
2
Figure 23
Hydraulic Decals
42422
4
3
5
7
6
3
4
6