Great Plains 3P600 Operator Manual - Manual (Page 34)

30 3P500, 3P500V & 3P600 Table of Contents Index Great Plains Manufacturing, Inc.
Table of Contents Index 2011-10-21
Seed Flap Replacement
Current Drill Model Flap
Refer to Figure 21
To replace a seed flap
, use needle nose pliers or
similar tool to grasp “T” top of flap. Pull upward to remove
flap from metal bracket
.
Push new seed flap down through metal bracket
until flap snaps into place with “T” top resting on top of
bracket.
If a Seed-Lok
®
or Keeton
®
seed firmer is also installed, it
may be necessary to shorten the flap.
Older Drill Model Flap
Refer to Figure 22
To replace a seed flap
use a needle nose or similar
tool and squeeze the tabs together. Pull plastic seed
flap down out of metal bracket .
Push new seed flap up through metal bracket until
tabs on seed flap snap in place.
If a Seed-Lok
®
or Keeton
®
seed firmer is also installed, it
may be necessary to shorten the flap.
Figure 21
Seed Tube Flap
31047
2
1
1
2
1 2
Figure 22
Older Seed Tube Flap
19398
3
2
1
2
1
2
1 3
1 3
2