Great Plains 3P600 Operator Manual - Manual (Page 17)

2011-10-21 Table of Contents Index
Great Plains Manufacturing, Inc. Table of Contents Index 13
Operation Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
1. Carefully read “Important Safety Information”
starting on page 1.
2. Lubricate drill per “Lubrication and Scheduled
Maintenance” starting on page 32.
3. Check all tires for proper inflation. See “Tire
Pressures” on page 40.
4. Check all bolts, pins and fasteners. See “Torque
Values Chart” on page 41.
5. Check drill for worn or damaged parts. Repair or
replace faulty parts before going to the field.
6. Rotate both drive wheel to verify that the drive and
meters are working properly and free from foreign
material.
Falling Hazard:
Watch your step when walking on drill steps and walkboard.
Falling from drill could cause severe injury or death.
WARNING
To avoid serious injury or death:
Watch your step when climbing ladder or
walking on walkboard.
838-102C