Great Plains Case Drain & Motor Return Tractor Connection Guide - Manual (Page 24)

page 14 of 28
Great Plains Manufacturing reserves the right to make changes or to add improvements to this guide at any time without notice or obligation.
ba082710 r3
CDMR 08/27/10
Great Plains P/N 811-269C
Eaton Aeroquip P/N 202702-12-8S
Parker P/N 8-12F5OMXS
Eaton Aeroquip P/N 221501-12-8S
Parker P/N 12-8TRTXS & 12BTX-S
3/4-16
FJIC
Motor Meturn
(without power beyond)
If tractor is not equipped with power beyond,
then a plug will need to be removed from the
front of the valve stack. The port is labled with
an “R” on the casting. Then install two
adaptors, a hose, an adaptor, and coupler as
shown.
Order and install the following:
Puma 165, 180, 195, 210, & 225
T7000 Series
Continued
front of valve stack
rear of valve stack
connected to fan
motor return hose
from Great Plains
}
supplied with Great Plains
planters and air drills
(p/n 811-069C)
3/4-16
FJIC
1-1/16-12
FJIC
3/4-16
MJIC
36”, 1/2 i.d. hydraulic hose
port labled
with an “R”
Eaton Aeroquip P/N GG108-NP12-27
Parker P/N 12M27F87OMXS
M27x2
MORB
1-1/16-12
MJIC
3/4-16
MJIC
1-1/16-12
MORB
connect to tractor
NOTE: See previous page for information
for motor return with power beyond.
Motor
Return