Great Plains P16867 Serial No 18009156 - Manual (Page 20)

X-Press Trailing Kit
Operating Instructions
20
4. Servicing and Maintenance
4. Servicing and
Maintenance
Follow the safety instructions for
servicing and maintenance.
These instructions refer only to the
Trailing Kit. For detailed
maintenance instructions for your
X-Press refer to the Operator‘s
Manual.
4.1 Servicing
Your machine has been designed and
constructed for maximum performance,
operational efficiency and operator
friendliness under a wide variety of operating
conditions.
Prior to delivery, your machine has
been checked at the factory and by
your authorised dealer to ensure that
you receive a machine in optimum
condition.
To ensure trouble-free operation, it is
important that servicing and maintenance
work is performed at the recommended
intervals.
4.2 Cleaning
In order to ensure that the machine is always
in operating condition and to achieve
optimum performance, perform the cleaning
and servicing work at regular intervals.
4.3 Operator Support
If you have a problem, please contact your
dealer. They will endeavour to solve any
problems which may occur and provide you
with support at all times.
In order to enable your dealer to deal with
problems as quickly as possible, it helps if
you can provide them with the following data.
Always state the:
• Customer Number
• Name and Address
• Machine Model
• Serial Number of Machine
• Date of Purchase and Operating Hours
• Type of Problem
4.4 Maintenance Intervals
Apart from daily maintenance, the
maintenance intervals are based on the
number of operating hours and time data.
Keep a record of your operating hours to
ensure that the specified maintenance
intervals are adhered to as closely as
possible.
Never use a machine that is due for
maintenance. Ensure that all deficiencies
found during regular checks are remedied
immediately.
Avoid sharp-edged and pointed
parts when working on the
machine.
Place the machine on suitable
supports when working
underneath! Do not work under a
machine which is not supported!
4.5 Wheel Hubs
Wheel hub maintenance and
servicing should be carried out by
an authorised Simba dealer.