Great Plains FH6800HD Operator Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. A.Important Safety Information 5
04/28/2014 564-070M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On cross-bars at center of center wing;
1 total
42317
838-614C
Red Reflectors
On rear of center wing (top) when folded up (both sides);
2 total
42317