Canon A400 - Manual (Page 23)

21
Preparing the Camera
Setting the Date/Time
The Date/Time menu will be displayed when
camera power is turned on for the first time or
with low date battery power. Perform
operations from Step 4 (Replace the date
battery when power from the current one is
exhausted (p. 120)).
1
Turn the power on (p. 23).
2
Press the MENU
button and select
the [ (Set up)]
menu using .
3
Select (Date/
Time) using or
and then press
the SET button.
4
Set the date and
time.
z Use or to change
the value of the
highlighted field.
z Press or to set the date and time.
z The date can be set up to the year 2030.
z The factory default for the date format may
differ from that shown here in some regions.
5
Press the SET button.
6
Press the MENU button.
z For embedding the date on the image
data, refer to page 52.
z Setting the date and time settings does
not cause the date/time stamp to appear
on images. For printing images with the
date on them, refer to page 92, the
Direct Print User Guide or Canon Digital
Camera Software Starter Guide Disk.
z For important information, see
Replacing the Date Battery (p. 120).