Great Plains 2515P Operator Manual - Manual (Page 35)

4/11/2005 173-208M
33 Adjustments
Cleaning Out Meters
NOTE: Shut off sliding seed tubes before attempt-
ing to clean out seed meters.
Refer to Figure 35
For seed meter clean out:
1. Position tarp or buckets under the row unit(s)
whose meter(s) you will be cleaning out.
2. Remove retaining clip and pull pin.
Refer to Figure 36
3. Pull up on meter clean out door to open.
Refer to Figure 37
4. When meter is empty, push meter clean out
door back to its original position to close.
NOTE: You may need to shake the clean out door
a little before closing to make sure all seeds fall
out.
5. Replace pin and retaining clip.
Figure 35
Meter clean out
18261
Retaining clip
Clean out door
Figure 36
Meter clean out door
19190
Clean out door
Figure 1
Meter Clean Out
18293
Figure 37
Close and pin clean out door
19192
Clean out door