beautypg.com

Using this manual, Definitions, Owner assistance – Great Plains 2N-3010 Operator Manual User Manual

Page 9: Product support

background image

Great Plains Manufacturing, Inc.

Table of Contents

Index

Introduction

5

2013-05-23

Table of Contents

Index

133-029M

Using This Manual

This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.

The information in this manual is current at printing.
Some parts may change to assure top performance.

Definitions

The following terms are used throughout this manual.

Note: Useful information related to the preceding topic.

A crucial point of information related to the preceding topic.
For safe and correct operation, read and follow the directions
provided before continuing.

Owner Assistance

If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.

Refer to Figure 3

Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located on the left hand end of the left wing frame.

Record your Small Grass Seed Attachment model and
installation date here for quick reference:

Model Number:__________________________

Date Installed: __________________________

Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.

For further assistance write to:

Product Support

Great Plains Mfg. Inc., Service Department

PO Box 5060

Salina, KS 67402-5060

785-823-3276

Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.

Figure 2

Left / Right Notation

14570

R

L

U

D

F

B

L

R

Figure 3

Drill Serial Number Plate

16537

1.

Discuss the matter with your dealership
service manager. Make sure they are aware
of any problems so they can assist you.

2.

If you are still unsatisfied, seek out the owner
or general manager of the dealership.

This manual is related to the following products: