Great Plains 2N-3010 Operator Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Table of Contents Index Assembly and Setup 11
2013-05-23 Table of Contents Index 133-029M
Seed Box Mounting
Refer to Figure 8
Attach the handle to the left and right hand end
mounts using a
1 ⁄
2
in x
3 ⁄
4
in hex head bolt with
1 ⁄
2
in
washers and nuts. Fasten the u-channel mount to the
right hand Small Grass Seeds box using
3 ⁄
8
in x 1
1 ⁄
4
in
bolts with the small seeds mounting strap with
3 ⁄
8
in
washers and nuts ( , , ). On the left hand boxes
(the boxes with the drive system), attach the drive
guard mount with mount strap and
3 ⁄
8
in x 1
1 ⁄
4
in
bolts ,
3 ⁄
8
in nuts and washers ( , , ). Attach the
left hand and right hand box end mounts to the small
grass seeds boxes using
3 ⁄
8
in x 1
1 ⁄
4
in bolts ,
3 ⁄
8
in nuts
with washers ( , , ), and mount straps . Then
loosely fasten the Small Grass Seeds boxes to the back
of the drill box with
1 ⁄
2
in x 1
1 ⁄
2
in bolts ,
1 ⁄
2
in nuts and
washers ( , , ), and seed box mount straps .
Bolt the end mounts to the walk boards loosely using the
1 ⁄
2
in x 1
1 ⁄
4
inch bolts ,
1 ⁄
2
in nuts and washers ( , ,
). Align the boxes and mounts to each other and the
drill. Tighten all connections.
2
1 3
4
8
7 5
16 17 18
6
9 5
7 16 17 18
1
7
16 17 18 5
11
12 13 14 10
15 12 13
14
Figure 8
Seed Box Mounting Assembly
13363