Great Plains 2N-3010 Operator Manual - Manual (Page 7)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 3
2013-05-23 Table of Contents Index 133-029M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals.
▲ When ordering new parts or components, also request
corresponding safety decals.
Order new decals from your Great Plains dealer. Refer to
this section for proper decal placement.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Danger: Possible Chemical Hazard
838-467C
On the underside of each small seeds box lid;
2 total
Warning: Moving Parts Hazard
818-205C
On the drive guard mount weldment;
1 total
13734
818-205C Rev. B
To prevent serious injury or death from moving parts: Do not operate with guard missing Close & secure drive guard before starting
MOVING PARTS HAZARD
WARNING
13670
818-205C Rev. B
To prevent serious injury or death from
moving parts:
Do not operate with guard missing
Close & secure drive guard before starting
MOVING PARTS HAZARD
WARNING