Canon IMAGE RUNNER 5075 User Manual
Page 154
Printing Directly from the Remote UI
5-20
5
Ho
w
to Use the Direct
Pri
nt F
unction
4
Specify the settings under [Print Settings] according to your
preference.
Details of each menu are shown below.
[Resolution]
This setting specifies the resolution for printing.
Resolution is expressed in units of dpi (dots per inch),
indicating the number of dots in one inch. The higher the value,
the greater the resolution, allowing finer expression of detail.
If [600 dpi] is selected, you can perform printing suited to
general documents and tables.
If [1200 dpi] is selected, characters and lines can be finely
printed.
*
This function is not available on the imageRUNNER 5050.
[Copies]
This setting enables you to specify the number of copies
printed.
[2-Sided]
This setting specifies whether to print on one-side or both sides
of the paper.
[Binding
Location]
This setting specifies whether to place the binding position
along the long edge or the short edge of the paper. If the
margin is specified on the touch panel display, the binding
margin position is automatically adjusted on the front and back
sides of the paper.
For more information, see