Copy set numbering, Copy set numbering -39, Qcopy set numbering – Canon IMAGE RUNNER 5075 User Manual

Page 107: Pr inter settings menu, On, off, Settings menu, Copy number, First copy, Second copy third copy

Settings Menu

3-39

inter Settings Menu

Copy Set Numbering

On, Off

This setting enables you to print documents with a five digit serial number in the
background on each copy.

Copy numbers are printed in the following methods:

When printing three copies of a five page document:

IMPORTANT

If this setting is used in combination with [Forced Secure Watermark Mode (print)]
in System Settings (from the Additional Functions screen), this setting is invalid.
For details on the Forced Secure Watermark Mode function, see Chapter 6,
"System Manager Settings," in the Reference Guide.

If the 'Finishing' settings are specified as [Rotate+Group], [Offset+Group], and
[Staple+Group], then [Rotate+Collate], [Offset+Collate], and [Staple+Collate] are
specified.

NOTE

If the copy number has fewer than five digits, the machine prints it as follows:
- Example: If the copy number is 10

10 Á 00010

Copy numbers are not printed on blank pages (pages with no data).

If this setting is used in combination with 'Margin' or 'Offset Short Edge/Offset Long
Edge', part of the copy number may be cut off.

This function is not available if 'Transparency Interleaving' is enabled.

00001

Copy Number

00001

First Copy

00002

00003

Second Copy

Third Copy