Great Plains Verti-Till Field Update - Manual (Page 20)

20 Verti-Till Field Update Great Plains Manufacturing, Inc.
596-186M 08/06/2007
Existing Parts Affected
The following existing parts may be involved in the kit
installation. The Disposition column indicates whether
parts are left in place, moved or not re-used. The part call-out numbers in the list match all Figures in
the installation instructions. Descriptions match those in
your implement Parts manual.
Existing Parts List
Callout Part No. Part Description Part Disposition
161-073H CYLINDER LOCK CHANNEL-LONG Removed. Not re-used.
802-114C HHCS 3/8-16X2 1/2 GR5 Removed. Not re-used.
802-168C HHCS 3/8-16X3 1/4 GR5 Removed. Not re-used.
802-382C HHCS 3/8-16X2 1/4 GR5 Removed. Not re-used.
803-013C NUT LOCK 3/8-16 PLT Removed. Not re-used.
804-029C WASHER FLAT 1 SAE Removed. Not re-used.
805-058C PIN COTTER 3/16 X 2 Removed. Not re-used.
805-090C PIN CLEVIS 1 X 3 3/16 LG Removed. Not re-used.
805-152C BENT PIN 3/8 X 2 1/2 USE W/COT Removed. Not re-used.
- Transport Lift Cylinder
810-516C CYL 4X8X1.5 ROD HARDENED BUSH Removed. Not re-used.
810-536C CYL 4X8X1.5 ROD 1 1/4BX1R HOLE Removed. Not re-used.
810-584C CYL 4.25X8X2.0RD 1.25BX1R HOLE Removed and re-installed.
811-063C EL 3/4MJIC 3/4MORB Removed and re-installed.
890-005C BUSHING CYL 1 1/4 X 1 X 1 Removed. Not re-used.
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65