Great Plains 2SF30 Operator Manual - Manual (Page 46)

42 2SF24/30 Table of Contents Index Great Plains Manufacturing, Inc.
155-015M-A Table of Contents Index 2014-01-09
Small Seeds Attachment
To calibrate the seeding rate on the optional small seeds
attachment, follow these steps.
Refer to Figure 32
1.
The proper small-seeds sprocket arrangement given
different drive types on the main drill box. Arrange
the sprockets on the small-seeds attachment
according to which drive type you will use on the
main drill box.
Note: For accurate metering on the small seeds
attachment, the main drill box sprockets must be
set to drive type 1, 2 or 2A.
2. Set the seed-rate adjustment handle on the small
seeds attachment as indicated by the charts, “Small
Grass Seed Charts” beginning on page 43.
3. Calibrate the small seeds attachment to your
material by following the steps under “Seeding
Adjustments” on page 34.
Figure 32
Small Seeds Sprocket Arrangements
16399