Great Plains 2SF30 Operator Manual - Manual (Page 10)

6 2SF24/30 Table of Contents Index Great Plains Manufacturing, Inc.
155-015M-A Table of Contents Index 2014-01-09
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
On the left end of the opener frame, facing rear in
transport;
1 total
11366
838-265C
Amber Reflectors
On the outside face of the right and left hopper, on the
outward face both ends of the right and left walkboard
frame;
6 total
2
2SF-24
19948