Canon LV-X2 - Manual (Page 9)

9
PREPARATION
POSITIONING THE PROJECTOR
● This projector is designed to project on a flat projection surface.
● The projector can be focused from 3.6’(1.1m) ~ 26.2’(8m).
● Refer to the figure below to adjust a screen size.
ADJUSTABLE FEET
ADJUSTABLE FEET
FEET LOCK
LATCHES
39”
140”
200”
280”
200”
143”
100”
29”
100”
70”
H1
H2
Max. Zoom
Min. Zoom
26.2’(8.0m)
18.7’(5.7m)
13.1’(4.0m)
3.6’(1.1m)
9.2’(2.8m)
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted to approx.
10 degrees.
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of a projector. 1
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to
adjust position and tilt. 2
To retract the ADJUSTABLE FEET, lift the front of the
projector and pull the FEET LOCK LATCHES and push to
feet upward.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.) 3
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.
ROOM LIGHT
The brightness of a room has a great impact on
picture quality. It is recommended to limit
ambient lighting to provide the best image.
Screen Size
(W x H) mm
Zoom (min)
50”
Zoom (max)
1016 x 762
6.6' (2.0m)
4.6' (1.4m)
100”
2032 x 1524
13.1' (4.0m)
9.2' (2.8m)
150”
3048 x 2286
19.7' (6.0m)
14.1' (4.3m)
200”
4064 x 3048
26.2' (8.0m)
18.7' (5.7m)
29”
589 x 442
3.6' (1.1m)
–––––
✽ The projection maximum screen size is 200”.