Canon LV-X2 - Manual (Page 30)

30
VIDEO INPUT
SELECTING THE INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Choose Video by pressing the INPUT button on the Top Control or on
the Remote Control Unit.
If the projector cannot reproduce a proper video source, select correct
input source through the MENU OPERATION (see below).
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button to move the red
frame to the INPUT Menu icon.
Press the POINT DOWN button to move the red arrow to Video
and then press the SET button. The Source Select Menu will
appear.
1
2
Move the red
arrow to Video
and press the
SET button.
VIDEO
Move the red arrow to the source and press the SET
button.
Source Select Menu (VIDEO)
INPUT MENU
INPUT button
Video
Computer
Move the red arrow to the source that you want to select and
then press the SET button. 3
The projector automatically detects incoming the Video
signal, and adjusts itself to optimize its performance.
• When both VIDEO jack and S-VIDEO jack are
connected, S-VIDEO jack has priority over VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are
connected, Y-Pb/Cb-Pr/Cr jacks have priority over S-
VIDEO jack.
Auto
When the video input signal is connected to VIDEO jack,
select Video.
Video
When the video input signal is connected to S-VIDEO
jack, select S-Video.
S-Video
When the video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
Y,Pb/Cb,Pr/Cr