Canon LV-X2 - Manual (Page 17)

17
BEFORE OPERATION
HOW TO OPERATE THE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
Display ON-SCREEN MENU
Press MENU button to display ON-SCREEN MENU (MENU
BAR). The red frame is the POINTER.
Move POINTER (red frame) to MENU ICON that you want to
select by pressing POINT RIGHT / LEFT buttons.
Adjust the ITEM DATA by pressing the POINT RIGHT / LEFT
buttons.
Refer to the following pages for details of respective
adjustments.
Press POINT DOWN button and move POINTER (red frame
or red arrow) to the ITEM that you want to adjust, and then
press the SET button to show the DATA.
Select Menu to be adjusted
Control or adjust item through ON-SCREEN MENU
1
2
4
3
You can control and adjust this projector through the ON-SCREEN
MENU. Refer to the following pages to operate each adjustment
on ON-SCREEN MENU.
OPERATING THE ON-SCREEN MENU
WARNIN
TEMP.
INPUT
SET
KEY
STONE
MENU
VOL VOL
– +
Used to select the item.
SET BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
POINT BUTTONS
TOP CONTROL
MENU BAR
POINTER
(red frame)
MENU ICON
ITEM DATA
Press POINT LEFT/RIGHT
buttons to adjust value or
set function.
SET
BUTTON
POINTER (red frame)
Press POINT DOWN button to
move POINTER.
ITEM
Used to select the item.
SET BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
POINT BUTTON
REMOTE CONTROL UNIT
MENU BUTTON
MENU BUTTON
MOVING POINTER
SELECT ITEM
Move the pointer ( ✽ see below) or adjust the value of item by
pressing POINT button(s) on Top Control or on Remote
Control Unit.
Select the item or set selected function by pressing SET
button.
✽ Pointer is the icon on ON-SCREEN MENU to select the item.
See the figures on the section "FLOW OF ON-SCREEN MENU
OPERATION" below.
DISPLAY MENU
Press MENU button to display ON-SCREEN MENU. 1
3
2