Rfid interface box specification, Specifications, Fcc statement – Monarch Instrument RFID LOGGER User Manual
Page 13

Page 13
Rev 1.0
03122014 AJW
6. RFID Interface Box Specification
6.1. Specifications
Protocol:
ISO/IEC 15693 (single subcarrier).
Carrier Frequency:
13.56MHz 13.553MHz min – 13.567MHz max
Carrier Modulation Index:
ISO/IEC 15693 30%
Output RF Power:
55mW
Interface:
USB (mini socket). USB cable provided.
Power:
5V from USB Port (100mA max)
Antenna:
Fixed PCB etched antenna
Size:
Plastic enclosure – 10.5cm x 6.5cm x 2.25cm (LxWxH)
Operating Temperature:
0°to +50°C
Operating modes:
Operating Modes:
Idle (no RF – normal mode).
Read Tag – max on time 7 sec on user command,
Write tag – max on time 3 sec on user command.
6.2. FCC Statement
FCC ID: 2ABSR-5396-9920
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1.) This device may not cause harmful interference.
2.) This device must accept any interference received, including interference that may cause undesired operation.
3.) Changes or modifications not expressly approved by Monarch Instrument could void the user’s authority to
operate this device.
Product FCC Label