Dymo LabelManager Wireless PnP Quick Start Guide - Manual (Page 8)

4
Inserting the Label Cassette
Your label maker uses DYMO D1
label cassettes.
To insert the label cassette
1 Press and pull to open the
side cover of the label maker.
2 Make sure the tape and ribbon
are taut across the mouth of the
cassette and that the tape
passes between the label
guides. See Figure 3.
If necessary, turn the ribbon
rewind spool clockwise to
tighten the ribbon.
3 Insert the cassette and press
firmly until the cassette clicks
into place. See Figure 4.
4 Close the side cover of the
label maker.
Figure 3
Label guides Ribbon rewind
spool
Press
and pull
Figure 4
Click!