ClearOne StreamNet Infrastructure and Network - Manual (Page 18)

15 TechSales StreamNet Design Help: 1.800.705.2103
Set the “Network Directed Broadcast” function to Forward Broadcast commands. •
Configure
Interface VLAN 2
Routing
IP netdirbcast
Turn on IP IGMP v2 or v3 Querying and set the Query Interval. •
Configure
Interface VLAN 2
IP igmp
IP IGMP Version 2
IP IGMP Query-interval 125
Turn on IP IGMP v2 or v3 Snooping, set Interval and Leave Time •
Configure
IP IGMP Snooping
IP IGMP Snooping Querier
IP IGMP Snooping Querier version 2
IP IGMP Snooping Querier Query-interval 125
Interface Range Ethernet All
IP IGMP Snooping Leave-Time-Out Immediate-Leave
Turn on IP Routing •
Configure
IP Routing
Turn off STP (Spanning Tree Protocol) or set STP to Rapid Mode. •
Configure
No Spanning-Tree
OR
Spanning-Tree Mode RSTP
Turn on Multicast Filtering •
Configure
Bridge Multicast Filtering
Turn on Jumbo Frame Support (only needed with uncompressed streams). StreamNet stream •
packets are MTU 4096.
Configure
Interface Range Ethernet All
MTU 4096