ClearOne StreamNet Infrastructure and Network - Manual (Page 12)

9 TechSales StreamNet Design Help: 1.800.705.2103
S
tream
N
et
P
o
e I
Njector
c
omPatIbIlIty
BraNd PrOdUCT mOdeL #
NetStreams TouchLinX TL430
NetStreams TouchLinX TL700
NetStreams TouchLinX TL380
NetStreams ViewLinX VL9300
NetStreams MediaLinX MLA101
NetStreams MediaLinX MLA9101
NetStreams ControLinX CL100
NetStreams ControLinX CL9100
NetStreams DoorLinX DX100
NetStreams TheaterLinX TH100
ClearOne View TL430
ClearOne View TL700
ClearOne View VL9300
ClearOne View MLA101
ClearOne View MLA9101
ClearOne View CL100
ClearOne View CL9100
f
or
vlaN u
Se
c
aSeS
The Master Switch must be configured for IGMP Snooping and IGMP Querying (Master Switch
must be the IGMP Querier for the Network). IP Routing, IP Multicasting and IGMP must be config-
ured globally on the Switch. IGMP will then need to be configured on each VLAN for proper IGMP/
VLAN Routing.
VLAN or Frame Tagging - All VLAN interfaces configured for VLAN Routing will need to have the
allowed VLANs added for proper VLAN communication.
TTL Settings - Each StreamNet device and control software must have a Time to Live (TTL) setting
equal to each router hop, or each VLAN depth transversal. For the example below you would set
the StreamNet devices to have a TLL of 2.