Setup – ClearOne NS-IPD-100 User Manual
Page 7
Chapter 3: Dealer Setup and Configuration 4
sEtuP
Use the following steps to configure an IP Address and the optional DHCP Server.
Launch the Dealer Setup application. The Dealer Setup application will search and identify each IPD100
1.
device currently on the NetStreams network. A list of found devices will appear in the Device Panel of the
Dealer Setup screen.
> notE: If setting up via the optional DHCP method, verify that the IP settings of the IPD100 and
the device it is paired with (touchlinX tla250 as shown in the Basic Connections diagram
above or the speakerlinX sl251) are consistent. units must be on the same IP subnet.
Select the device that provides the user interface to the Docking Station (TLA250 in the Basic Connection
2.
diagram) from the selection on the screen’s Project Panel then click the “show advanced options”
button on the Device Panel.