ClearOne Digital Media - Manual (Page 51)

MediaLinX
Converts analog audio or PCM digital signals into streaming TCP/IP 24-bit/96kHz audio
streams in real time. MediaLinX also converts analog video signals into streaming TCP/IP up
to 1080p and controls legacy sources with stored IR (Infrared) commands, offering IR pass-
through and power status sensing of attached components.
MLA9101 – IP Audio encoder-Newer native IP
Based sources can output the audio directly onto
the network through the Ethernet connection.
Older legacy sources that output the audio over a line
level connection need a device to convert the audio to
an IP stream. For each legacy source the MediaLinX
encodes and prepares the audio for distribution across the DigiLinX network. In addition
to encoding, MediaLinX also provides a mechanism for one-way and two-way control,
gathering metadata and power management of the source.
MLAV9300 – IP Video/audio encoder-gateway
for audio and SD/HD quality video to flow into the
DigiLinX network. For each source a MLAV9300
encodes and prepares the audio and video for
distribution across the TCP/IP netowrk. Provides a
mechanism for on way and two way control of the
source and can ensure that the source stays power on.
MLAV9500 – IP-Based A/V Encoder. DVI-D (HDMI
compatible/HDCP Compliant). Supports 1080p
and multichannel digital audio as well as analog
two channel audio in. IR input, IR/Serial RS232 output
in a 1U half rack width enclosure. Includes HDMI/DVI
adapter.
MediaLinXPro MLA4000 – IP Based 4-source
MediaLiNX component that combines digital
conversion of up to four Legacy analog or digital audio
sources and control of third party sub-systems such as
HVAC, lighting and security.
pg 51 StreamNet Digital Media and System Design Reference Guide
StreamNet Products
TM
Power MediaLinX A/V
MLAV9500-CS