LaMotte DO 6 Dissolved Oxygen Meter - Manual (Page 11)

3.5 Connecting the Probe to Meter
1. Insert the BNC connector from the electrode to the BNC connector socket
on the meter accordingly and rotate connector clockwise until it locks. See
Figure 6 below.
2. To remove, simply rotate the connector in counter-clockwise direction
until it unlocks, and slide the connector off the socket.
3. Plug the phono jack of temperature sensor into the phono socket of the
meter as shown in Figure 6 below.
Caution: Do not pull or force the probe cord or the probe wires might
disconnect.
Note: Keep connectors clean. Do not touch connector with soiled hands.
Figure 6: DO 6 probe to meter connections
10
BNC Connector for
DO probe
Phono jack for
Temperature probe