LaMotte TDS 6 Conductivity - Manual (Page 32)

If an error message appears, turning off the meter and
turning it on again may eliminate the error message.
Refer to diagram on right.
If error persists, or the meter shows incorrect values,
return the meter.
For a complete diagram of the display see page 3.
SPECIFICATIONS DESCRIPTIONS CON 6 TDS 6
Conductivity Range 0 to 20.00, 200.0,
2000 µS/cm;
0 to 20.00,
200.0 mS/cm
X
Resolution 0.01, 0.1, 1 µS/cm:
0.01, 0.1 ,S/cm
X
Accuracy ±1% F.S.
X
TDS Range 0 to 10.00, 10.0 to
100.0, 100 to 1000
ppm;
1.00 to 10.00, 10.00 to
100.0, Up to 200 ppt
depending on the
TDS factor setting.
X
Resolution 0.01, 0.1, 1 ppm;
0.01, 0.1 ppt
X X
Accuracy
±1% F.S. X X
Temperature Range -10.0 to 110.0 °C
X X
Resolution/Accuracy 0.1 °C / ± 0.5 for °C X
X
Cell Constant 0.1, 1.0, 10.0
(selectable)
X X
Temperature
Compensation Automatic / Manual
(from 0 to 50 °C)
X X
LO
S µ
32