Exide Technologies GB4109 User Manual
Page 26
Sales x Service x Recycling 888.563.6300 in the USA 800.268.2698 in Canada
23
4. Restart the charge cycle by pressing the
START key.
5. If the charger starts with no faults, the fault was likely caused by the build up of heat in the
charger.
6. If the fault persists, verify that all fans are operational. If one or more fans are not
operational, switch off the disconnect switch and contact GNB Industrial Power.
4. Battery Disconnected Fault
C
H
A
R
G
E
C
Y
C
L
E
S
T
O
P
P
E
D
B
A
T
T
E
R
Y
D
I
C
O
N
N
E
C
T
E
D
E
X
I
T
Possible Causes:
¾
Battery cable was disconnected while the charger cycle is active
¾
The charger or battery cables are worn out
¾
The charger or battery connectors’ contacts are worn out
Troubleshooting:
1. If the battery was intentionally disconnected, press the
STOP key to clear the fault message.
2. If the battery was not intentionally disconnected, check the charger and battery cables as
well as the charger and battery connectors’ contacts. Fix or replace worn out contacts /
cables.
3. Press the
STOP key to clear the fault message.
4. Restart the charge cycle by pressing the
START key.
5. If the fault persists, turn off the charger and contact GNB Industrial Power.
5. Battery Fault: Over Temperature
B
A
T
T
E
R
Y
F
A
U
L
T
:
O
V
E
R
B
A
T
T
E
R
Y
T
E
M
P
E
R
A
T
U
R
E
E
X
I
T