Exide Technologies GB4109 User Manual
Page 13
Sales x Service x Recycling 888.563.6300 in the USA 800.268.2698 in Canada
10
Charger Controls and User Interface
The charger main disconnect is located on the upper right side of charger. The user interface panel is
located on the front of the charger (see Fig. 8).
Fig. 8: Charger Controls
The following is a brief description of the charger controls:
1. Main Disconnect Switch: This is a padlock type disconnect switch that should be in the OFF
position and padlocked before any panels or drawers are removed. It disconnects AC power
from all parts of the system.
2. LCD/Keypad Assembly: The main user interface for viewing and displaying operation and fault
messages as well as programming the charger.
¾
The disconnect switch action is rotational where turning the switch clockwise will move the switch to
the ON position (arrow pointing up) while turning the switch counter clockwise will move the switch
to the OFF position (arrow pointing to the left) as shown in Fig. 9.
Fig. 9: Disconnect and Stop Switch Actions
1- Main
Disconnect
Power Switch
2 -LCD /
Keypad